[Linux]AppImage形式でのJoplinのインストール

修正した部分は黄色マーカー＋赤字です。

#!/usr/bin/env bash

set -e

trap 'handleError' ERR

handleError() {
    echo ""
    echo "If you encountered an error, please consider fixing"
    echo "the script for your environment and creating a pull"
    echo "request instead of asking for support on GitHub or"
    echo "the forum. The error message above should tell you"
    echo "where and why the error happened."
}

#-----------------------------------------------------
# Variables
#-----------------------------------------------------
COLOR_RED=`tput setaf 1`
COLOR_GREEN=`tput setaf 2`
COLOR_YELLOW=`tput setaf 3`
COLOR_BLUE=`tput setaf 4`
COLOR_RESET=`tput sgr0`
SILENT=false
ALLOW_ROOT=false
SHOW_CHANGELOG=false
INCLUDE_PRE_RELEASE=false

print() {
    if [[ "${SILENT}" == false ]] ; then
        echo -e "$@"
    fi
}

showLogo() {
    print "${COLOR_BLUE}"
    print "     _             _ _       "
    print "    | | ___  _ __ | (_)_ __  "
    print " _  | |/ _ \| '_ \| | | '_ \ "
    print "| |_| | (_) | |_) | | | | | |"
    print " \___/ \___/| .__/|_|_|_| |_|"
    print "            |_|"
    print ""
    print "Linux Installer and Updater"
    print "${COLOR_RESET}"
}

showHelp() {
    showLogo
    print "Available Arguments:"
    print "\t" "--help" "\t" "Show this help information" "\n"
    print "\t" "--allow-root" "\t" "Allow the install to be run as root"
    print "\t" "--changelog" "\t" "Show the changelog after installation"
    print "\t" "--force" "\t" "Always download the latest version"
    print "\t" "--silent" "\t" "Don't print any output"
    print "\t" "--prerelease" "\t" "Check for new Versions including Pre-Releases" 

    if [[ ! -z $1 ]]; then
        print "\n" "${COLOR_RED}ERROR: " "$*" "${COLOR_RESET}" "\n"
    else
        exit 0
    fi

}

#-----------------------------------------------------
# PARSE ARGUMENTS
#-----------------------------------------------------

optspec=":h-:"
while getopts "${optspec}" OPT; do
  [ "${OPT}" = " " ] && continue
  if [ "${OPT}" = "-" ]; then   # long option: reformulate OPT and OPTARG
    OPT="${OPTARG%%=*}"       # extract long option name
    OPTARG="${OPTARG#$OPT}"   # extract long option argument (may be empty)
    OPTARG="${OPTARG#=}"      # if long option argument, remove assigning `=`
  fi
  case "${OPT}" in
    h | help )     showHelp ;;
    allow-root )   ALLOW_ROOT=true ;;
    silent )       SILENT=true ;;
    force )        FORCE=true ;;
    changelog )    SHOW_CHANGELOG=true ;;
    prerelease )   INCLUDE_PRE_RELEASE=true ;;
    [^\?]* )       showHelp "Illegal option --${OPT}"; exit 2 ;;
    \? )           showHelp "Illegal option -${OPTARG}"; exit 2 ;;
  esac
done
shift $((OPTIND-1)) # remove parsed options and args from $@ list

## Check and warn if running as root.
if [[ $EUID = 0 ]] && [[ "${ALLOW_ROOT}" != true ]]; then
    showHelp "It is not recommended (nor necessary) to run this script as root. To do so anyway, please use '--allow-root'"
    exit 1
fi

#-----------------------------------------------------
# START
#-----------------------------------------------------
showLogo

#-----------------------------------------------------
print "Checking architecture..."
## uname actually gives more information than needed, but it contains all architectures (hardware and software)
ARCHITECTURE=$(uname -m -p -i || echo "NO CHECK")

if [[ $ARCHITECTURE = "NO CHECK" ]] ; then
  print "${COLOR_YELLOW}WARNING: Can't get system architecture, skipping check${COLOR_RESET}"
elif [[ $ARCHITECTURE =~ .*aarch.*|.*arm.* ]] ; then
  showHelp "Arm systems are not officially supported by Joplin, please search the forum (https://discourse.joplinapp.org/) for more information"
  exit 1
elif [[ $ARCHITECTURE =~ .*i386.*|.*i686.* ]] ; then
  showHelp "32-bit systems are not supported by Joplin, please search the forum (https://discourse.joplinapp.org/) for more information"
  exit 1
fi

#-----------------------------------------------------
# Download Joplin
#-----------------------------------------------------

# Get the latest version to download
if [[ "$INCLUDE_PRE_RELEASE" == true ]]; then
  RELEASE_VERSION=$(wget -qO - "https://api.github.com/repos/laurent22/joplin/releases" | grep -Po '"tag_name": ?"v\K.*?(?=")' | sort -rV | head -1)
else
  RELEASE_VERSION=$(wget -qO - "https://api.github.com/repos/laurent22/joplin/releases/latest" | grep -Po '"tag_name": ?"v\K.*?(?=")')
fi

# Check if it's in the latest version
if [[ -e ~/.joplin/VERSION ]] && [[ $(< ~/.joplin/VERSION) == "${RELEASE_VERSION}" ]]; then
    print "${COLOR_GREEN}You already have the latest version${COLOR_RESET} ${RELEASE_VERSION} ${COLOR_GREEN}installed.${COLOR_RESET}"
    ([[ "$FORCE" == true ]] && print "Forcing installation...") || exit 0
else
    [[ -e ~/.joplin/VERSION ]] && CURRENT_VERSION=$(< ~/.joplin/VERSION)
    print "The latest version is ${RELEASE_VERSION}, but you have ${CURRENT_VERSION:-no version} installed."
fi

#-----------------------------------------------------
print 'Downloading Joplin...'
TEMP_DIR=$(mktemp -d)
wget -O "${TEMP_DIR}/Joplin.AppImage" "https://github.com/laurent22/joplin/releases/download/v${RELEASE_VERSION}/Joplin-${RELEASE_VERSION}.AppImage"
wget -O "${TEMP_DIR}/joplin.png" https://joplinapp.org/images/Icon512.png

#-----------------------------------------------------
print 'Installing Joplin...'
# Delete previous version (in future versions joplin.desktop shouldn't exist)
rm -f /opt/joplin/*.AppImage /usr/share/applications/joplin.desktop /opt/joplin/VERSION

# Creates the folder where the binary will be stored
mkdir -p /opt/joplin/

# Download the latest version
mv "${TEMP_DIR}/Joplin.AppImage" /opt/joplin/Joplin.AppImage

# Gives execution privileges
chmod +x /opt/joplin/Joplin.AppImage

print "${COLOR_GREEN}OK${COLOR_RESET}"

#-----------------------------------------------------
print 'Installing icon...'
mkdir -p /usr/share/icons/hicolor/512x512/apps
mv "${TEMP_DIR}/joplin.png" /usr/share/icons/hicolor/512x512/apps/joplin.png
print "${COLOR_GREEN}OK${COLOR_RESET}"

# Detect desktop environment
if [ "$XDG_CURRENT_DESKTOP" = "" ]
then
  DESKTOP=$(echo "${XDG_DATA_DIRS}" | sed 's/.*\(xfce\|kde\|gnome\).*/\1/')
else
  DESKTOP=$XDG_CURRENT_DESKTOP
fi
DESKTOP=${DESKTOP,,}  # convert to lower case

echo 'Create Desktop icon...'

# Detect distribution environment, and apply --no-sandbox fix
SANDBOXPARAM=""
# lsb_release isn't available on some platforms (e.g. opensuse)
# The equivalent of lsb_release in OpenSuse is the file /usr/lib/os-release
if command -v lsb_release &> /dev/null; then
  DISTVER=$(lsb_release -is) && DISTVER=$DISTVER$(lsb_release -rs)
  DISTCODENAME=$(lsb_release -cs)
  DISTMAJOR=$(lsb_release -rs|cut -d. -f1)
  #-----------------------------------------------------
  # Check for "The SUID sandbox helper binary was found, but is not configured correctly" problem.
  # It is present in Debian 1X. A (temporary) patch will be applied at .desktop file
  # Linux Mint 4 Debbie is based on Debian 10 and requires the same param handling.
  if [[ $DISTVER =~ Debian1. ]] || [ "$DISTVER" = "Linuxmint4" ] && [ "$DISTCODENAME" = "debbie" ] || [ "$DISTVER" = "CentOS" ] && [[ "$DISTMAJOR" =~ 6|7 ]]
  then
    SANDBOXPARAM="--no-sandbox"
  fi
fi

# Initially only desktop environments that were confirmed to use desktop files stored in
# `.local/share/desktop` had a desktop file created.
# However some environments don't return a desktop BUT still support these desktop files
# the command check was added to support all Desktops that have support for the
# freedesktop standard 
# The old checks are left in place for historical reasons, but
# NO MORE DESKTOP ENVIRONMENTS SHOULD BE ADDED
# If a new environment needs to be supported, then the command check section should be re-thought
if [[ $DESKTOP =~ .*gnome.*|.*kde.*|.*xfce.*|.*mate.*|.*lxqt.*|.*unity.*|.*x-cinnamon.*|.*deepin.*|.*pantheon.*|.*lxde.*|.*i3.*|.*sway.* ]] || [[ `command -v update-desktop-database` ]]
then
    # Only delete the desktop file if it will be replaced
    rm -f /usr/share/applications/appimagekit-joplin.desktop

    # On some systems this directory doesn't exist by default
    mkdir -p /usr/share/applications

    # Tabs specifically, and not spaces, are needed for indentation with Bash heredocs
    cat >> /usr/share/applications/appimagekit-joplin.desktop <<-EOF
    [Desktop Entry]
    Encoding=UTF-8
    Name=Joplin
    Comment=Joplin for Desktop
    Exec=/opt/joplin/Joplin.AppImage ${SANDBOXPARAM} %u
    Icon=joplin
    StartupWMClass=Joplin
    Type=Application
    Categories=Office;
    MimeType=x-scheme-handler/joplin;
    EOF

    # Update application icons
    [[ `command -v update-desktop-database` ]] && update-desktop-database /usr/share/applications && update-desktop-database /usr/share/icons
    print "${COLOR_GREEN}OK${COLOR_RESET}"
else
    print "${COLOR_RED}NOT DONE, unknown desktop '${DESKTOP}'${COLOR_RESET}"
fi

#-----------------------------------------------------
# FINISH INSTALLATION
#-----------------------------------------------------

# Informs the user that it has been installed
print "${COLOR_GREEN}Joplin version${COLOR_RESET} ${RELEASE_VERSION} ${COLOR_GREEN}installed.${COLOR_RESET}"

# Record version
echo "$RELEASE_VERSION" > /opt/joplin/VERSION

#-----------------------------------------------------
if [[ "$SHOW_CHANGELOG" == true ]]; then
    NOTES=$(wget -qO - https://api.github.com/repos/laurent22/joplin/releases/latest | grep -Po '"body": "\K.*(?=")')
    print "${COLOR_BLUE}Changelog:${COLOR_RESET}\n${NOTES}"
fi

#-----------------------------------------------------
print "Cleaning up..."
rm -rf "$TEMP_DIR"
print "${COLOR_GREEN}OK${COLOR_RESET}"